nTact nRad1 Slot-Die-Coater
Slot-die coating system · Substrates up to 210 × 297 mm · Film thickness 20 nm – 100 µm · Heated ceramic chuck · 2 dies
nTact nRad1 slot-die coater – previously operated in a glovebox
Why the nRad1?
The nRad1 is a compact lab coater for slot-die coating – built on the same technology nTact uses in large industrial systems.
From lab to production
nTact slot-die technology is used up to the industrial display format of 2,160 × 2,460 mm. Processes developed on the nRad1 can be transferred to production systems.
Homogeneous nanometre films
Only a few equipment makers achieve reproducible, homogeneous slot-die films of 20 to 100 nm. At commissioning, PEDOT:PSS films of around 65 nm were reached with only minor adjustments – with headroom for even thinner films.
Patented process technology
Stationary chuck with moving die for stability on a small footprint, substrate surface measurement with automatic coating-gap setting via Z servo motor and contact linear encoder, dynamically adjustable dispense rate and automated edge-bead formation (priming).
Precise, low-friction motion
The die travels on a precision linear motor along air-bearing guides – near-zero drag for a uniform coating speed.
Extensively equipped
Two stainless-steel dies (70 and 206 mm coating width), porous ceramic vacuum chuck for thin foils, chuck heating up to 50 °C and a heated reservoir with stirrer up to 60 °C. Price when new (2019): €158,815 net.
Economical with costly materials
Low-volume die and a system fill volume below 10 ml – ideal for precious research inks.
Glovebox-ready
Compact footprint (approx. 911 × 578 × 685 mm) for installation in laboratory gloveboxes. The nRad1 has so far been operated under inert gas in a glovebox; the glovebox is available as an option.
Service still available
The former nTact sales and service partner for the DACH region continues to offer service for the nRad1 (as of October 2026).
Typical applications
Typical fields of slot-die coating; suitability depends on material and viscosity.
Equipment & configuration
- nRad1 base system with precision linear drive, Z servo axis and contact linear encoder for gap setting
- Syringe pump for viscosities up to 80 cP (fill volume 2.5 or 5 ml)
- Slot die SST 316L, 70 mm coating width
- Second slot die SST 316L, corrosion-resistant, low-volume design, 206 mm coating width (reducible with shims), incl. 5 shims
- Porous ceramic vacuum chuck (Kyocera, 25–50 µm pore size) for thin, flexible substrates up to A4 – two vacuum zones
- Chuck heating up to 50 °C
- Heated reservoir with stirrer, max. 60 °C
- Lead-in plate for coating-bead formation, priming trough with interchangeable inserts
- 7-inch touchscreen; PC software for recipe creation, recipe transfer via Ethernet
- Documented process recipe for PEDOT:PSS (approx. 100–110 nm on 3-inch glass)
- Manufacturer documentation (operation & service manual, data sheet, wiring and pneumatic diagrams, facilities drawing)
- Optional: GS Glovebox M-Line with gas purification – on request
Specifications
Configuration of this unit
According to the order confirmation (2019) and commissioning report (2020).
| Manufacturer | nTact (FAS Holdings Group), Dallas, Texas, USA |
|---|---|
| Model | nRad1, base system 150 mm |
| Purchase / commissioning | 2019 / July 2020 |
| Price when new | €158,815 net (USD 178,940) |
| Dispensing | Syringe pump, viscosity up to 80 cP, fill volume 2.5 or 5 ml |
| Die 1 | SST 316L, coating width 70 mm, fill volume approx. 4 ml |
| Die 2 | SST 316L, corrosion-resistant, low-volume; coating width 206 mm (reducible with shims), fill volume approx. 4–8 ml depending on width; 5 shims |
| Chuck | Porous ceramic (Kyocera), pore size 25–50 µm, up to A4, 2 vacuum zones |
| Heating | Chuck up to 50 °C · reservoir with stirrer up to 60 °C |
| Operation | 7-inch touchscreen; PC software for recipes, transfer via Ethernet |
nRad1 system specification
Manufacturer data from data sheet and manual; film values depend on material and process.
| Substrate size | Standard 150 × 150 mm, max. 210 × 297 mm (A4) |
|---|---|
| Substrates | Glass, plastic, metal foils, silicon wafers – rigid or flexible |
| Substrate thickness | rigid 0.5–6 mm · flexible > 100 µm |
| Film thickness | 20 nm – 100 µm (dry) |
| Uniformity | ±3 % or better (films > 150 nm) · ±5 % or better (50–150 nm) |
| Edge effect | 5–10 mm or better (leading and trailing edge) |
| Viscosity | Standard 1–70 cP; up to 5,000 cP with optional high-viscosity pump (not included) |
| System fill volume | below 10 ml possible |
| Traverse speed | typ. 1–40 mm/s, max. 50 mm/s |
| Drive | Precision linear motor on air-bearing guide; Z-axis with servo motor and ball screw |
| Dimensions (L × W × H) | approx. 911 × 578 × 685 mm |
| Weight | approx. 170 kg |
| Facilities | Clean dry air 6.9 bar at 40 Nl/min · vacuum −85 kPa · 120/240 V AC, 50/60 Hz, single phase, 15 A |
| Compliance | UL & CE |
Glovebox (optional)
Previous operating environment of the nRad1 – available on request.
| Type | GS Glovebox M-Line (2 filters + 1 activated-carbon filter) |
|---|---|
| Dimensions (W × H × D) | 3,049 × 1,883 × 1,041 mm |
| Weight | approx. 450 kg + 90 kg |
Documents
Interested in the nTact nRad1?
Request a quote or ask us about configuration, condition and the optional glovebox.
Send Email Call: +49 151 27024251